Contact information

1405,14F, Jinfuyuan Block A, No.888 Chouzhou North Road YiWu City, ZheJiang Province, China

We are available 24/ 7. Call Now. (+86 17848813660) info@rolangear.com

High speed PE pipe production line | Rolan ⚙️

Rolan Gear will guide you to produce good pipes with higher quality and lower cost

PE Production Line Details

pipe-making-machine

High speed PE pipe production line

PE pipe production line include:
automatic feeder, loss-in-weight metering controller, hopper dryer, SJ series single screw extruder, die, vacuum calibration tank, spray cooling tank, six-claw tractor, cutting machine, Stacker.

Rolan Series single screw extruder​

The Screw and Barrel Material is 38CrMoAlA,Nitriding treatment, Surface Chrome plate,
Nitriding Layer Thickness:0.5~0.7mm,

Surface Rigidity: 800-900HV.

1655778767951156

Rolan PE psipe mould

Specifications(Pressure Level SDR17, SDR11): 315mm,355mm,400mm,450mm,500mm,630mm. Base mould: 40Cr quenched and tempered. mouth mold: 40Cr forging, hard chrome plating. Extrusion head with spiral structure, make sure the melt in side distributed evenly so as to achieve best plasticization. Calibrator design with water ring which is easy to clean, to achieve bettercooling and then fast forming.
rolan2

Rolan Vacuum Tank

Pipe application scope: 315-630MM. Material: stainless steel 304. Vacuum pump model: Water circle. Advanced pipe line layout design and adjustable spray angle for better cooling effect, dense pipe line in the first zone for fast cooling.
1655773971128233

Haul-off machine and NO dust cutter

The haul-off machine: Traction block type: V-shaped rubber blocks. Traction speed: 0.3-3M/min. Traction motor power: 1.1*6KW. NO dust cutter: Cutting type: No-dust cutter. Cutting Blade: tip Knife. Clamping form when cutting: Pneumatic. Cutter is synrhonizedly controlled by servomotor to make sure precise cutting length.
rolan Haul-off machine and NO dust cutter

Rolan Series single screw extruder

The Screw and Barrel Material is 38CrMoAlA,Nitriding treatment, Surface Chrome plate, Nitriding Layer Thickness:0.5~0.7mm,
Surface Rigidity: 800-900HV.

Rolan PE pipe mould

Specifications(Pressure Level SDR17, SDR11): 315mm,355mm,400mm,450mm,500mm,630mm.
Base mould: 40Cr quenched and tempered.
mouth mold: 40Cr forging, hard chrome plating.
Extrusion head with spiral structure, make sure the melt in side distributed evenly so as to achieve best plasticization.
Calibrator design with water ring which is easy to clean, to achieve bettercooling and then fast forming.

Rolan Vacuum Tank

Pipe application scope: 315-630MM.
Material: stainless steel 304.
Vacuum pump model: Water circle.
Advanced pipe line layout design and adjustable spray angle for better cooling effect, dense pipe line in the first zone for fast cooling.

Haul-off machine and NO dust cutter

The haul-off machine: Traction block type: V-shaped rubber blocks. Traction speed: 0.3-3M/min. Traction motor power: 1.1*6KW. NO dust cutter: Cutting type: No-dust cutter. Cutting Blade: tip Knife. Clamping form when cutting: Pneumatic. Cutter is synrhonizedly controlled by servomotor to make sure precise cutting length.

Final Product Introduction:

This PE pipe making machine is used for HDPE PE water and gas pipe production which have excellent stiffness and flexibility, heat resistance, aging resistance, high mechanical strength, resistance of environmental stress cracks, resistance to creep deformation, heat-linkage, and so on. So, plastic water pipe extrusion machine is used to produce water supply pipe and drainage pipes between cities and suburbs. Large-diameter HDPE pipes begin to play a very important role in urban water supply and gas supply systems.

Final Product Introduction:

1. PE PP pipe making machine is mainly used for producing pipe of water supply and drainage in the field of agriculture and construction cable etc.

2. This PE pipe making machine consists of single screw extruder, mould, vacuum calibration tank,haul off unit,cutting unit,stack etc . The single screw extruder and haul off unit apply famous A/C frequency conversion speed regulation device,both vacuum pump and driving motor apply famous brand .

3. The haul-off unit includes two-claw type,three-claw type,four-claw type,six-claw type,eight-claw type, ten-claw type.

4. Dust free cutting machine,saw blade cutting machine or planetary cutting machine can be applied,the property of machine group is reliable.

5. The planetary cutting machine is controlled automatically with computer,it has such advantages of simple operation,reliable performance etc.It has reached international advanced level.

Parameters :

Why Rolan ?

Our reputation for exceeding the highest quality standards in precision parts machining is precisely why our customers choose us, and choose to stay with us. Our first customer is still our customer almost three decades later because of the quality they get part after part, year after year.

Our Support Team, Application Technology and service staff, with a global level of expertise, help you solve machines, systems and processes related to a variety of issues and needs.

CHOOSE US FOR QUALITY

EDUCATION & TRAININ

Individualized Service

Great Support

Contact Info

Contact Us Now

To get best quotes, we recommend including the following details:
-Self introduction -What are you looking for -Required specifications -Inquire about price/MOQ





    • Bubble
    • Bubble
    • Bubble

    Get in touch​

    Our goal is to provide you with excellent customer service while meeting all of your automation needs. We provide the peace of mind that comes from working with one machinery provider, one service department and one point of contact
    error: Content is protected !!