PVC pipe production line
Rolan ⚙️
Rolan Gear will guide you to produce good pipes with higher quality and lower cost
PVC PiPe Production Line Datiles
PVC Water Pipe Extrusion Machine
This PVC water pipe extrusion machine is mainly used to produce PVC drainage pipes and U-PVC,C-PVC water supply pipes in agriculture or construction field, and electrical cable protection pipes. This plastic pipe extrusion line consists of twin screw extruder, pipe die head and mould, calibration and spray cooling tank, haul-off, cutting machine and stacker.
Rolan Conical twin screw extruder
Main motor: 55KW AC SIEMENS
Capacity: 250-400KG/H
Control mode: SIEMENS PLC
Inverters: ABB
Voltage: 380V 50HZ
PVC drain pipe mould
110mm,125mm,140mm,160mm,200m
Vacuum calibration and cooling tank
Material: SUS304
Vacuum pump model: Water circle
Electrical Installation: SIEMENS
or SCHNEIDER with sealing IP65
Haul off machine and cutter
Rolan Conical twin screw extruder
Capacity: 250-400KG/H
Control mode: SIEMENS PLC
Inverters: ABB
Voltage: 380V 50HZ
PVC drain pipe mould
Specification: 75mm,80mm,90mm,100mm,110mm,125mm,140mm,160mm,200m
Vacuum calibration and cooling tank
Material: SUS304
Vacuum pump model: Water circle
Electrical Installation: SIEMENS or SCHNEIDER with sealing IP65
Haul off machine and cutter
Rubber piece type: V Rubber block
Model control: SIEMENS PLC
Cutter:
Cutting pattern: ring form cutting
Clamp form when cutting: Pneumatic
Final Product Introduction:
The PVC pipes produced by the PVC water pipe extrusion machine are widely used in municipal water supply and drainage, industrial water supply and drainage, civil water supply and drainage, irrigation, vegetation watering, etc. According to the diameter and function of PVC pipe, in the field of construction, PVC pipe is used for PVC conduit, PVC water supply pipe, PVC drain pipe, etc.
Final Product Introduction:
2. Extruder is specially used for PVC nitriding and chrome plated screw, longer service life.
3. The vacuum calibration tank is 304 stainless steel, equipped with vacuum pump and water pump.
4. The haul off machine adopts rubber crawler with large traction force. Transmission parts adopt gear transmission, more stable operation. The speed is controlled by frequency conversion..
5. Depending on the diameter of the pipe, the cutting machine can be used to lift the knife or ring cutting. The system is controlled by PLC.
6. The stacker use proximity switch to control the length of pipe, and the cylinder controls the blanking after cutting.
7. According to different pipe diameters, we can recommend the best water pipe extrusion machine plan.
Parameters :
Why Rolan ?
Our Support Team, Application Technology and service staff, with a global level of expertise, help you solve machines, systems and processes related to a variety of issues and needs.